The headset and receiver
Review the earcup shape, RGB lighting area and microphone position. The pictured receiver and adapter are configuration references; confirm the exact included set with your sample.
Private-label 2.4GHz gaming audio
G926 RGB wireless gaming headset for your brand
Building an RGB wireless headset range? G926 brings together 50mm drivers, a detachable microphone and a 1000mAh battery. Start with the receiver and product photos below, then discuss samples, your logo and retail packaging.
Listed playback is approximately 50 hours with lighting off. Confirm runtime, receiver setup and both audio and microphone operation on your target devices.
G926 product and scene images
See the headset, controls and gaming setup
A closer look at the RGB design, receiver and wearing position. These supplied creative images include AI-generated scenes, not customer photos or test reports. Confirm materials, comfort and microphone performance on your selected sample.
Picture it in a gaming setup
A creative gaming scene for your range or listing review. The listed 2.4G latency is 20ms; the image is not a zero-delay demonstration.
Check the wearing position
Look at earcup coverage and microphone placement, then check clamping feel, cushion contact and adjustment on the physical sample.
Controls, cushions and charging port
Use these detail views to prepare sample questions about the volume control, mute button, charging port and cushion finish. A USB-C charging port does not by itself establish wired USB audio.
Features at a glance
A presentation overview for product discussions. The internal-driver artwork is illustrative, not a teardown; noise reduction, cushion materials and long-session comfort should be checked on the selected sample.
Match the receiver to your device
The diagram shows receiver-based 2.4GHz use, not Bluetooth pairing. Confirm the exact device, USB audio support, receiver, adapter and microphone behavior; a pictured platform is not a completed compatibility test or an agreed packing list.
Ask about G926 with your device or request a sample for your brand.
Short answer
What is the TALRIVO G926 wireless gaming headset?
G926 is a TALRIVO 2.4G wireless RGB gaming headset with a JL7018M chipset, 50mm driver and 1000mAh battery. The page documents supplied images, receiver reference, detachable microphone, accessory set, packaging reference and sample questions.
Buyer action path
Review G926 as an RGB 2.4G headset option
G926 combines an RGB gaming appearance with a listed 20ms 2.4G latency, 10m transmission distance and detachable microphone. Confirm the receiver setup, appearance, microphone, comfort and packing list on the selected sample before branding work.
Model dataJL7018M 2.4G chipset, 50mm driver, 32 ohm impedance and 20Hz-20kHz frequency response.
Connection setupListed 20ms 2.4G latency, 10m transmission distance, 3dBm RF output power and -35dB receiving sensitivity.
RGB appearanceRecord earcup finish, lighting area, logo surface, color direction and visible product details from the physical sample.
Microphone reviewThe current specification lists a detachable boom microphone. Confirm its fit, connection, mute behavior and desk voice scenario on the selected sample.
Battery and charging1000mAh battery; approximately 50 hours listed with lighting off, 600 hours standby and 3-4 hours charging.
Next stepSend target market, channel, target devices, quantity range, branding needs and document questions together.
Additional product references
Receiver, cables and packing references
Use these compact product, accessory and use-scene images to discuss sample configuration, receiver direction, microphone structure, packaging and content checks before approval.
Additional product, receiver and packing images
Product overview and receiver
The compact overview shows the headset direction, RGB area, microphone position and receiver set for first sample discussion.
RGB, logo and microphone detail
Close-up imagery supports review of the earcup surface, logo area, RGB lighting and microphone connection point.
Comfort, receiver and controls
Detail views cover headband padding, ear cushion, receiver, controls, charging point and visible product construction.
Accessory and receiver set
The accessory image helps buyers confirm receiver, charging cable, audio cable and microphone-related parts by sample version.
Wearing fit reference
The wearing image supports discussion of headset size, microphone placement, earcup coverage and channel-facing product presentation.
Packaging and accessory set
The packaging reference helps confirm box direction, manual, receiver, cable set and sample content before customization discussion.
Use-scene references
Use-scene images show how the model can be presented for PC, console and daily communication contexts.
Key points
Product details at a glance
Use the corrected model data and supplied images to compare G926 before requesting a sample or packaging review.
JL7018M 2.4G chipset
The current sheet lists a JL7018M chipset with 3.0-4.2V operating voltage and 55mA operating current.
50mm driver
The listed audio configuration is a 50mm driver, 32 ohm impedance, 20Hz-20kHz frequency response and 110dB sensitivity.
Listed 20ms 2.4G latency
The current sheet lists 20ms 2.4G latency, 3dBm RF output power, -35dB receiving sensitivity and 10m transmission distance.
1000mAh battery
The listed battery capacity is 1000mAh, with approximately 50 hours playback with lighting off, 600 hours standby and 3-4 hours charging.
RGB gaming appearance
The visible RGB area and textured earcup design give this model a stronger gaming visual direction than cleaner minimalist styles.
Receiver and accessory review
The supplied images show receiver and cable references that buyers can use when checking the final sample package.
Detachable boom microphone
The current G926 specification lists a detachable boom microphone. Review its fit, connection and included parts on the selected sample before confirming content or packaging.
Signal and distortion values
The sheet lists a signal-to-noise ratio of <=85dB and 1% distortion. Confirm the selected sample version for a project.
Documented specifications
G926 product-sheet data for sample review
The following information follows the current G926 product sheet. Confirm the selected sample version, receiver, accessories and packaging before bulk order.
Chipset and powerJL7018M; 3.0-4.2V operating voltage; 55mA operating current.
Driver and impedance50mm driver; 32 ohms; 20Hz-20kHz frequency response; 110dB sensitivity.
Wireless specification3dBm RF output; -35dB receiving sensitivity; 10m transmission distance; 20ms listed 2.4G latency.
Signal and distortionSignal-to-noise ratio <=85dB; distortion 1%.
Battery and charging1000mAh; approximately 50 hours playback with lighting off; 600 hours standby; 3-4 hours charging.
MicrophoneDetachable boom microphone. Confirm the selected sample version and accessory set for a project.
Sample checklist
What to confirm before choosing G926
Connection and receiverConfirm receiver type, pairing behavior and accessory set against the selected sample version.
Appearance and RGBCheck earcup finish, RGB area, logo surface, visible seams and sample color direction.
Microphone and wearingReview detachable microphone fit and connection point, ear cushion coverage, headband fit and long-session comfort.
Packaging and documentsConfirm box direction, manual language, cable list, receiver set and any buyer-market labeling questions.
Sample evaluation
How buyers should evaluate a G926 sample before RFQ
Review G926 for a stronger RGB wireless look, then verify the physical sample against the buyer's target devices and sales channel before discussing final branding.
Check target devices first
Test the receiver and selected connection setup on the buyer's actual PC, console, laptop or desktop scenario before treating the model as approved.
Record visible product evidence
Confirm earcup finish, RGB area, headband, detachable microphone connection point, receiver, cable set and packaging contents with photos from the reviewed sample.
Separate model approval from branding
Approve comfort, connection behavior, microphone use and accessory list first. Discuss logo, color, artwork and manuals after the base version is clear.
Send a focused RFQ
Include destination market, channel, quantity range, sample feedback, required accessories, packaging direction and document questions so the reply can be specific.
Inquiry worksheet
G926 sample inquiry details to send
This structure helps an importer ask about the actual G926 sample instead of asking for a broad, unclear gaming-headset quote.
| Inquiry field | What to include | Why it matters |
|---|---|---|
| Buyer scenario | Target country, sales channel, target users and expected device setup. | G926 should be checked against the buyer's own retail or distributor context. |
| Receiver setup | Required receiver type, target devices and pairing questions. | The 2.4G setup depends on the selected receiver and sample behavior. |
| RGB and logo area | Preferred color direction, lighting area, logo surface and product image needs. | Appearance decisions should follow the approved physical sample. |
| Microphone and fit | Detachable microphone fit and connection, headset fit, earcup coverage and communication scenario. | These details affect sample approval more than generic wireless wording. |
| Accessory and packaging list | Receiver, cables, manual language, microphone-related parts, box direction and packing list. | The final package should not be assumed from one image alone. |
| RFQ handoff | Quantity range, sample feedback, branding scope, packaging needs and document questions. | A focused RFQ reduces back-and-forth before quotation discussion. |
Product FAQ
Common questions before G926 review
What is the TALRIVO G926 wireless gaming headset?
G926 is a 2.4G wireless RGB gaming headset with a JL7018M chipset, 50mm driver, 1000mAh battery and detachable boom microphone.
What are the main listed specifications for G926?
The sheet lists 3.0-4.2V operating voltage, 55mA operating current, 32 ohms, 20Hz-20kHz, 110dB sensitivity, 20ms 2.4G latency, 10m transmission distance, <=85dB signal-to-noise ratio and 1% distortion.
Does G926 use a detachable microphone?
Yes. The current specification lists a detachable boom microphone. Confirm its fit, connection and voice-chat behavior on the selected sample.
What should buyers confirm before sampling?
Confirm target devices, selected connection version, receiver set, microphone, RGB appearance, cable list, packaging direction and manual needs.
How should buyers move from sample to RFQ?
After checking the physical sample, send the market, channel, quantity range, connection setup, accessory questions, branding needs, packaging direction and documents.
Can G926 be compared with G935, G938 and G941?
Yes. Compare visual style, receiver direction, microphone structure, accessory set, packaging reference and target channel before sample selection.
Related pages
Continue comparing products
Gaming Headsets
Wireless Gaming Headsets
G935 Wireless Gaming Headset
G938 Wireless Gaming Headset
G941 Tri-Mode ANC Gaming Headset
Compare TALRIVO Product Models
Wireless Gaming Headset Sample Request
2.4G vs Bluetooth Buyer Guide
Gaming Headset Sample Process Checklist
Gaming Headset Sample & Quality Review
Packaging and Accessories Checklist
Gaming Headset Evidence Checklist
Wireless Microphone Noise Test Checklist
Gaming Headset Microphone Quality Checklist
Private Label Gaming Headset RFQ Checklist
Gaming Headset Manufacturer Buyer Checklist
Review G926 Wireless Gaming Headset samples
Share the destination market, sales channel, quantity range, sample timing, branding needs and packaging questions for a model-specific G926 review.