Headset overview and receiver
The overview shows the white headset shape, RGB earcup styling, fabric surfaces, boom microphone and supplied USB receiver reference.
Private-label 2.4GHz gaming audio
G936 wireless gaming headset with fabric cushions
Shortlist G936 when your gaming headset range needs a 2.4GHz receiver connection, knitted fabric contact surfaces and a detachable microphone. The listed configuration has 40mm drivers and an 800mAh battery. Review the cushion details and receiver set before discussing samples, logos and retail packaging.
Listed playback: approximately 40 hours with lighting off. Confirm fit, runtime and both playback and microphone operation on your target devices.
Documented specifications
G936 2.4G parameters for sample review
These parameters are from the current G936 specification. Confirm the final selected sample, receiver and included cable set before a project is approved.
2.4G chipsetJL7018M 2.4G chipset.
Driver40mm driver for the current documented version.
Listed latency20ms listed 2.4G latency; verify the final receiver and sample version.
Battery capacity800mAh battery.
Playback timeApproximately 40 hours with lighting off.
Standby and chargingUp to 500 hours standby and approximately 3 hours charging.
MicrophoneDetachable microphone for the current documented version.
Material referenceSupplied imagery shows a knitted fabric headband and ear cushions for sample comparison.
Connection verification
How should buyers verify the G936 receiver and target devices?
Before requesting a sample, buyers should name the target PCs, consoles, phones or tablets and verify the selected receiver interface, device detection, audio and microphone routing, control behavior and stability on each intended device. Compatibility should be confirmed on the physical sample rather than inferred from the product name.
Target-device listRecord the exact PC, console, phone or tablet types the buyer intends to support.
Receiver interfaceConfirm the receiver connector and any required adapter against the selected sample and accessory set.
Audio and microphoneVerify playback, microphone routing, mute behavior and controls on every intended device.
Sample recordKeep the receiver, cable set and observed device behavior tied to the approved G936 sample version.
Buyer action path
Turn the G936 fabric direction into a sample decision
G936 is useful when a buyer is not only choosing a headset shape, but also deciding whether fabric-contact surfaces fit the target channel. Keep material, wearing fit and accessory checks tied to the approved sample.
Model fitUse G936 when the shortlist needs a clean white headset direction with knitted fabric headband and cushions.
Material decisionCompare fabric and PU needs by sample, including surface feel, cleaning expectations, seal and long-session comfort notes.
Connection recordConfirm the selected connection version, receiver, 3.5 mm cable, charging cable and final package contents.
Microphone reviewCheck boom position, control layout, mute behavior and communication scenario before approving the model.
Visual evidenceUse the supplied images and official connection and cushion videos as references, then confirm final details on the physical sample.
Next stepSend target market, channel, selected material direction, accessory list, branding needs and document questions.
Official product videos
G936 connection and cushion references
Use the connection video to prepare target-device checks and the cushion video to compare material directions. Both are visual references; confirm the selected receiver, device behavior, material and configuration on the approved sample.
Product image evidence
G936 details buyers can review from supplied images
Use these images to align the base sample, accessory list and channel presentation before discussing branding, packaging or a quotation.
Microphone and controls
Close-up images support review of the boom microphone, visible buttons, RGB area, connection points and receiver form.
Receiver and cable set
The supplied set includes a USB receiver reference, USB-C charging cable and 3.5 mm audio cable. Confirm the final connection version and included contents on the selected sample.
Knitted fabric cushion detail
The fabric close-ups help buyers assess surface texture, stitching, ear-cushion shape, headband finish and visible control placement.
Wearing-fit reference
The wearing image gives a practical reference for headband profile, earcup coverage and boom-microphone placement during sample review.
Packaging and accessory set
The package image supports discussion of headset, microphone, receiver, cables, manual, box structure and final packing-list checks.
Use-scene references
PC and desk scenes provide visual context for gaming, desktop and everyday communication product presentation.
Comfort direction
Knitted fabric surfaces are a sample decision, not a generic claim
Fabric cushions and headbands change the visible product character and can change the wearing experience. Evaluate the actual material, cushion fill, clamp, earcup seal and cleaning expectations on the approved sample rather than assuming one material suits every channel.
Lightweight directionUse G936 when the assortment needs a visibly lighter, cleaner gaming-headset direction. Confirm the final product weight from the selected specification sheet.
Knitted fabric detailsThe supplied G936 images show knitted fabric on the headband and ear cushions, giving buyers a clear material reference for sample discussion.
PU versus fabric reviewCompare surface feel, warm-session comfort, cleaning routine, finish, replacement fit and audio seal on samples before choosing a cushion direction.
Model-specific evidenceUse the G936 image set to avoid applying one model's cushion or accessory details to another headset configuration.
Sample checklist
What to confirm before choosing G936
The connection version, receiver behavior, battery, driver and included accessories should follow the final approved sample and specification sheet.
Download the editable headset sample review sheet (TXT). Record the G936 version, target device, receiver, playback and microphone results, fabric-cushion feedback and actual box contents. This is a blank worksheet, not a completed test report.
Connection and accessoriesConfirm the selected connection version, receiver, 3.5 mm cable, charging cable and final packing list against the physical sample.
Microphone and controlsCheck boom position, microphone connection, control layout, mute behavior and communication result in the intended use case.
Cushion and headband materialCheck the fabric texture, seams, cushion recovery, earcup fit, headband contact and cleaning expectations after realistic wear.
RGB and appearanceReview lighting behavior, earcup finish, white color consistency, logo area and visible molding details on the approved version.
Packaging and documentsConfirm manual language, receiver storage, cable list, microphone packing, artwork and market-specific labeling before final approval.
Sample evaluation
How buyers should evaluate G936 before RFQ
G936 should be evaluated as a lightweight, fabric-led headset direction. The strongest buyer questions are about wearing fit, material choice, connection setup and final package contents.
Confirm the wearing scenario
Check the headset on the buyer's expected users or channel profile, then record headband contact, ear coverage, microphone position and comfort feedback.
Compare fabric against PU needs
Use the official cushion video and physical samples to decide whether knitted fabric or another cushion direction fits the intended market and cleaning expectations.
Verify connection and accessories
Match the receiver, charging cable, audio cable, microphone, manual and box contents against the final sample version before artwork starts.
Prepare the RFQ around the approved version
Send target market, channel, selected material direction, accessory list, packaging questions, branding needs and document requirements after sample review.
Fabric worksheet
G936 material sample questions for buyers
Use this worksheet when the buyer is comparing knitted fabric cushions against a PU or mixed-material headset direction.
| Check point | What to review on the sample | Buyer note |
|---|---|---|
| Surface feel | Fabric texture, stitching, seam placement and skin-contact comfort. | Useful for markets where long-session comfort and appearance matter. |
| Cushion recovery | Foam rebound, cushion shape and earcup coverage after realistic wear. | Do not assume the same result from another model or material. |
| Heat and cleaning | Warm-session feel, dust pickup and cleaning expectations for the target channel. | Different channels may prefer different maintenance tradeoffs. |
| Audio seal | Fit around the ear, seal consistency and any change compared with PU direction. | Material choice should be checked together with the headset construction. |
| Accessory match | Receiver, 3.5 mm cable, USB-C charging cable, microphone, manual and box contents. | Keep the final packing list tied to the approved sample version. |
| RFQ notes | Selected material direction, target devices, packaging language, logo area and document questions. | The RFQ should describe the approved sample, not only the product name. |
Product FAQ
Common questions before G936 review
What is the TALRIVO G936 2.4G gaming headset?
The TALRIVO G936 is a 2.4G wireless gaming headset built around the JL7018M chipset, a 40mm driver, an 800mAh battery and a detachable microphone. Its listed 2.4G latency is 20ms, with approximately 40 hours of playback when lighting is off, up to 500 hours standby and about three hours charging.
What are the documented G936 technical specifications?
The confirmed G936 specification lists a JL7018M 2.4G chipset, 40mm driver, 800mAh battery, 20ms listed 2.4G latency, approximately 40 hours of playback with lighting off, up to 500 hours standby, about three hours charging and a detachable microphone.
How should buyers verify the G936 receiver and target devices?
Before requesting a sample, buyers should name the target PCs, consoles, phones or tablets and verify the selected receiver interface, device detection, audio and microphone routing, control behavior and stability on each intended device. Compatibility should be confirmed on the physical sample rather than inferred from the product name.
What does the G936 image set show?
The supplied image set shows the white headset from multiple angles, knitted fabric headband and ear cushions, detachable microphone, visible controls, USB receiver, 3.5mm audio cable, USB-C charging cable, packaging and use-scene references.
How should buyers evaluate the G936 fabric ear cushions?
Review the actual selected sample for material finish, earcup fit, comfort, heat build-up, cleaning expectations, replacement fit and the resulting audio seal. The fabric direction should be confirmed against the final approved configuration.
What should buyers confirm before requesting a G936 sample?
Confirm the target devices, receiver and cable set, microphone structure, RGB behavior, comfort details, packaging contents, logo area, manual language and destination-market requirements.
When is G936 a useful model direction?
Use G936 when the buyer needs a clean white gaming headset direction with fabric-contact surfaces, visible receiver and cable evidence, and a comfort-focused sample path.
Related pages
Continue preparing a focused headset sample review
Gaming Headsets
Wired Gaming Headsets
PU vs Fabric Ear Cushion Sample Checklist
2.4G vs Bluetooth Gaming Headset Buyer Guide
Gaming Headset Product Evidence Checklist
Gaming Headset Sample Process Checklist
Gaming Headset Sample & Quality Review
Gaming Headset Sample Checklist
Wireless Microphone Noise Test Checklist
Private Label Gaming Headset RFQ Checklist
G935 Wireless Gaming Headset
G938 Wireless Gaming Headset
Gaming Headset Sample Request
Gaming Headset Manufacturer Buyer Checklist
Review G936 Lightweight Gaming Headset samples
Share the target market, channel, selected connection version, sample timing, material preference, branding needs and packaging questions for a model-specific review.